Skip to content

how to · accessories

How to Clean a Pickleball Paddle

Clean raw T700 peel-ply with the CRBN latex eraser. Water only on fiberglass, graphite, and coated faces. Price bands, not live prices.

By DecoPublished November 6, 2026Last updated November 6, 2026

Player holding a pickleball paddle on an outdoor court

Quick answer

X-40 and Dura Fast 40 dust packs into raw T700 peel-ply (DBD Control, Prism Flash, Mav Pro T700 3K) and dulls spin before the carbon is gone. The CRBN eraser is latex rubber, 2 by 2 by 1 in and 1.5 oz, $ band, for raw peel-ply only. Skip it on coating, spray, or paint. Other faces get a damp water-only wipe. Regrip and retape the same day. Polished grit or a crushed core needs a new paddle.

Spin that feels dead after a week of outdoor play is often dust in the face, not a dead paddle. Outdoor balls leave a fine powder. On a raw peel-ply texture that powder fills the low spots, so the ball sits on dust instead of carbon. A smooth fiberglass face, a MaxGrit fiberglass face, a graphite face, and any face with a coating, spray, or paint need a different tool. Match the cleaner to the line the listing prints.

The materials split is carbon fiber vs fiberglass. The mold split is thermoformed vs traditional. Faces that print raw carbon or T700 are on best raw carbon paddles. The eraser, overgrips, and edge tape live in the accessories catalog.

Match the cleaner to the face

A carbon word on a paddle is not a cleaning instruction. Read the face sentence, then pick the tool.

  • Raw T700 or T700 raw carbon

    Catalog example
    DBD Control ($$$$$), Prism Flash ($$$$)
    Use this
    CRBN rubber eraser, then a dry microfiber
    Leave in the bag
    Solvents, a soaking cloth, or a hose
  • T700 3K raw carbon

    Catalog example
    Mav Pro 2.0 ($$$$$), 16mm honeycomb
    Use this
    The same eraser on that raw-carbon line
    Leave in the bag
    A soak, or a closed car trunk
  • Graphite, Nomex honeycomb

    Catalog example
    Onix Graphite Z5 ($$$$)
    Use this
    Damp water-only microfiber, then dry
    Leave in the bag
    The rubber eraser and a hose
  • Smooth fiberglass

    Catalog example
    HEAD Radical Elite ($$$)
    Use this
    Damp water-only microfiber
    Leave in the bag
    The eraser and melamine foam
  • MaxGrit on fiberglass

    Catalog example
    Franklin Signature Pro 13mm ($$)
    Use this
    Damp water-only microfiber
    Leave in the bag
    Treating MaxGrit as raw peel-ply
  • Carbon plus fiberglass hybrid

    Catalog example
    SLK Helix Pro ($$), thermoformed core
    Use this
    Damp water-only microfiber
    Leave in the bag
    The eraser and trunk heat
  • Coating, spray, or paint

    Catalog example
    Diadem ICON, polyurethane coating ($)
    Use this
    Damp water-only microfiber
    Leave in the bag
    The eraser. Listing bars coating, spray, and paint
  • Thermoformed edge, raw carbon not printed

    Catalog example
    JOOLA Perseus 16mm ($$$$$)
    Use this
    Damp water-only microfiber
    Leave in the bag
    Calling this face peel-ply

Why outdoor ball dust kills spin on peel-ply

Raw peel-ply is a textured carbon surface, not a smooth paint. The CRBN eraser listing is the catalog line that says raw peel-ply. It is made to lift ball residue, dirt, and light scuffs off carbon-fiber faces, and the same block is listed for other raw peel-ply surfaces, including kevlar.

These paddles are the raw-carbon examples. They do not all print the word peel-ply. They do print the face you maintain with that eraser:

  • Six Zero Double Black Diamond Control prints a raw T700 carbon face celebrated for grit and spin longevity, plus control-tuned foam edge walls. Upper band ($$$$$). Millimeters are not printed.
  • Vatic Pro Prism Flash prints a T700 raw carbon face, a 16mm poly core, foam-injected edge walls, and cold-molded control/touch. Band ($$$$).
  • Holbrook Mav Pro 2.0 is the listing that prints T700 3K raw carbon with enhanced grit for spin, plus a 16mm dual-reactive polypropylene honeycomb core. Upper band ($$$$$). The description positions thermoformed carbon. That mold sentence is separate from the face sentence.

Outdoor dust is the usual reason a textured face feels slick while the carbon is still there. The powder packs into the low spots of the texture. The next ball meets dust, so brush and roll lose bite. You can see it as a pale film in the sweet spot after a few games on concrete or asphalt. Wiping that film off is maintenance. It is not a grit score, and this catalog prints no RPM.

The outdoor balls that leave the dust

Two outdoor listings cover the balls most US courts put in play. Neither listing prints a dust weight. Both are outdoor balls, and both sit in the $ band.

  • Franklin X-40, 12-pack prints 40 machine-drilled holes, seamless one-piece construction, and play on concrete and asphalt. The listing also prints USAP approval and the US Open.
  • Dura Fast 40 prints an outdoor pack of 6, and says the balls fly true, straight, and fast. The same listing says performance balls do not last forever, and that weather, play style, and court affect durability.

Fresh balls do not replace a clean face. A chalky raw-carbon face and a cracked ball are two different fixes. Ball choice for indoor gyms versus outdoor hard courts is indoor vs outdoor balls.

Rubber eraser versus a damp microfiber

Use the eraser when the face is raw peel-ply and the texture looks packed, not polished away.

The CRBN block contains latex. Printed size is 2 inches by 2 inches by 1 inch. Net weight is 1.5 ounces. Price band is $. Rub with short strokes and light pressure. You are lifting residue, not sanding carbon. A dry microfiber picks up what the block loosens so you do not grind crumbs back into the texture.

A damp microfiber is the whole method on smooth, painted, sprayed, and graphite faces. On a raw peel-ply face it is only the follow-up, and only when a dry cloth left a film. Wring it until it does not drip. Water that runs into the edge or under the handle is how a honeycomb core and a grip go soft.

Clean a raw peel-ply face

  1. Read the face line on the paddle you own. Raw T700, T700 raw carbon, or T700 3K raw carbon stays in this section. A coating, spray, paint, fiberglass, or graphite line moves to the water-only section. The eraser listing says CRBN does not recommend the block on an aftermarket coating, spray, or paint.
  2. Knock the loose dust off outside. Face down, tap the handle, and let the powder fall away from the court and your bag.
  3. Rub the eraser in short strokes across the sweet spot, then the rest of the face. Stop when the pale film is gone and the texture feels like texture. More pressure does not create grit.
  4. Wipe with a dry microfiber. If a haze remains, one pass with a barely damp cloth, then dry immediately.
  5. Check the edge and the handle before you zip the cover. Dust on the face is not the same job as a slick grip or a scraped edge. Those are the next section.

Smooth fiberglass, painted grit, and graphite

These faces do not get the rubber block. The texture, when they have one, is a finish on fiberglass or graphite, or a coating on carbon. The eraser listing is for raw peel-ply, not for these finishes.

Catalog examples, quoted from the feature lines:

  • Onix Graphite Z5 prints a graphite carbon-fiber face, a Nomex honeycomb core, and a widebody large sweet spot. Band ($$$$). This is the classic smooth-graphite case: water only, and no hose.
  • HEAD Radical Elite prints a fiberglass hitting surface, an OTC honeycomb polymer core, and a smoother face. Band ($$$). Smoother face means less spin on the listing. It does not mean peel-ply.
  • Franklin Signature Series Pro 13mm prints a MaxGrit fiberglass surface, a 13mm polypropylene core, and an elongated 16.5-inch shape. Band ($$). MaxGrit on fiberglass is still fiberglass.
  • Selkirk SLK Helix Pro prints a carbon-plus-fiberglass hybrid face and a thermoformed core. Band ($$). Hybrid is not raw T700.
  • Diadem ICON prints a Japanese carbon fiber face and a Spin RP polyurethane coating, plus an 8mm PP honeycomb core. Band ($). A coating is the case the eraser listing tells you to skip.
  • JOOLA Perseus 16mm prints a Reactive Propulsion Core and a 16mm thermoformed edge. Upper band ($$$$$). It does not print raw carbon or T700. Clean it like a finished face, and do not store it hot. Shop the raw-carbon Perseus lines on the raw carbon guide if the face words are what you wanted.

Water-only wipe

  1. Start with a clean microfiber and plain water. No soap, no spray cleaner, no alcohol.
  2. Wring the cloth until it is cool and barely damp. If it drips, it is too wet for a honeycomb core or a wrapped handle.
  3. Wipe the face in one direction, then dry it with a second cloth. Include the edge guard only if you can keep water out of any seam.
  4. Stop. A second product will not add spin to a smooth fiberglass face. Radical Elite already prints a smoother face and less spin. That is the build, not a dirty build.

Refresh the handle and the edge on the same pass

A clean face with a slick handle still flies out of the hand on a speed-up. Do the grip and the edge while the paddle is already out of the bag.

  • Pale film on a textured raw face

    What it usually is
    Outdoor ball dust in the peel-ply
    Do this
    CRBN eraser, then a dry cloth
    Band
    $
  • Smooth fiberglass, graphite, or a coated face

    What it usually is
    Dirt on a finish, not peel-ply
    Do this
    Damp water-only wipe, then dry
    Band
    No extra product
  • Handle twists in the hand

    What it usually is
    Worn overgrip
    Do this
    Franklin overgrip or Tourna Mega Tac
    Band
    $
  • Scuffs on the perimeter

    What it usually is
    Court contact on the edge
    Do this
    Edge tape matched to the printed thickness
    Band
    $
  • Texture polished smooth

    What it usually is
    Peel-ply worn through
    Do this
    Stop scrubbing and shop a face line
    Band
    See replacement guides
  • Dead spot or a lifting edge

    What it usually is
    Core crush or delamination
    Do this
    Retire the paddle
    Band
    See replacement guides

Overgrips

Franklin Pickleball Overgrips are a 3-pack. Each grip is 43.3 inches, long enough to wrap over the grip already on the handle. The listing says the material is for durability and all-day play. Band $. This is the default refresh when the handle is shiny and you do not need extra tack.

Tourna Mega Tac is the tackiest grip the listing says Tourna has created. It prints extended tack life, a durable-construction line, 3 grips, finishing tape, and made in the USA. Band $. Pick it when summer humidity makes a standard wrap slick before the Franklin pack is used up. The “tenfold” sentence is the listing’s claim. It is not a lab result on this site.

Wrap either grip over a clean, dry handle. A damp handle under new tape slips, and trapped water sits against the pallet.

Edge-guard tape

Professor Pickleball Edge Guard Tape is wear-resistant vinyl that shields the edge from dings and scratches. The listing offers it for 12mm–14mm edges and for 16mm+ edges, shaped for a curved perimeter so it fits without wrinkles, with a built-in alignment guide. Band $.

Match the roll to a thickness the paddle actually prints:

  • 16mm+ tape fits Prism Flash (16mm poly core), Mav Pro 2.0 (16mm honeycomb), and Perseus 16mm (16mm thermoformed edge). Franklin Signature Pro prints 13mm, so that one is the 12mm–14mm roll.
  • Do not guess on Double Black Diamond Control, Onix Z5, Helix Pro, or Radical Elite. Those listings do not print a millimeter. Measure the edge, or read the live cart, before you pick a width.

A spare grip and a roll of tape are the kind of no-size extras on best pickleball stocking stuffers. The wider accessories write-up, including when a grip is the whole purchase, is the accessories buying guide. Shop the category at accessories.

Heat, honeycomb, and a closed car

Cleaning day is also a storage check. A thermoformed paddle and a honeycomb-core paddle do not belong in a closed trunk or on a dashboard in the sun. Heat can soften glue. A core that crushes or a face that lifts will not come back with an eraser or a damp cloth.

  • JOOLA Perseus 16mm prints a 16mm thermoformed edge.
  • Selkirk SLK Helix Pro prints a thermoformed core.
  • Mav Pro 2.0 prints a polypropylene honeycomb core, and the description positions thermoformed carbon.
  • Onix Z5 prints a Nomex honeycomb core. Radical Elite prints an OTC honeycomb polymer core. Diadem ICON prints an 8mm PP honeycomb core.

How the mold differs from the face fiber is thermoformed vs traditional. Why a fiberglass face and a raw carbon face are different tools is carbon fiber vs fiberglass.

When cleaning will not bring spin or pop back

Two failures survive a perfect cleaning. They ask for a different paddle, not a different cloth.

  • Texture feels open and spin returns

    What that means
    The face was packed with ball dust
    Next step
    Keep the eraser in the bag for the next outdoor week
  • Face is smooth and shiny where grit used to be

    What that means
    Peel-ply is worn through
    Next step
    Shop a listing that still prints raw carbon or T700
  • Dead sound, soft spot, or a gap at the edge

    What that means
    Core crush or delamination
    Next step
    Retire it. Heat and impact did this, not dust

Worn peel-ply

If the sweet spot is polished smooth, the eraser has nothing to uncover. More rubbing only shortens whatever texture is left. That paddle’s spin life is over even if the core still feels lively. Replace it with a face line you can read: raw T700, T700 raw carbon, or T700 3K raw carbon. The shortlist, with grit language quoted only when the listing prints it, is best raw carbon paddles. Browse the full paddles catalog after you name the face.

Core crush and delamination

Pop that stays flat after the face is clean is a core problem. A dead spot, a soft patch, or an edge that is separating will not improve with water or rubber. Perseus 16mm and Helix Pro are the thermoformed examples on this page. Onix Z5 is the Nomex honeycomb example. Any of those builds can crush or separate after impact or after heat. Cleaning is the wrong repair.

If the replacement should stay in a mid-tier cart, use best paddles under $150. “Under $150” is that guide’s shopping brief, not a guaranteed total. Helix Pro on this page is $$. Prism Flash is $$$$. Perseus 16mm and Double Black Diamond Control are $$$$$. Read the badge, then confirm Amazon.com.

Pros

  • Splits raw peel-ply (eraser) from fiberglass, MaxGrit, graphite, hybrid, and coated faces (water only)
  • Quotes the CRBN block: latex, 2 by 2 by 1 inch, 1.5 ounces, not for coating, spray, or paint
  • Pairs the face clean with a $ band overgrip and edge tape on the same pass
  • Separates ball-dust dullness from worn peel-ply and from core crush
  • Uses catalog bands only and names the outdoor balls that leave the dust

Cons

  • No RPM, grit score, or wear-hour number is printed in the catalog
  • DBD Control, Onix Z5, Helix Pro, and Radical Elite do not print thickness, so tape width is a cart check
  • A carbon word alone is not permission to use the eraser
  • Heat damage and delamination are not reversed by cleaning
  • Retail SKUs and live prices change — confirm on Amazon.com

Shopping on Amazon.com

Price badges on this site are relative catalog bands ($–$$$$$), not a live cart total. Confirm the current price, the seller, and the exact model on Amazon.com before you buy. Shoe width, paddle thickness, and bag capacity change by SKU — match the listing to the line this guide named.

Keep learning

Products mentioned

Frequently asked questions

How do I clean a raw carbon pickleball paddle?

Confirm the listing prints raw carbon or T700. Double Black Diamond Control prints a raw T700 carbon face celebrated for grit and spin longevity. Prism Flash prints a T700 raw carbon face. Mav Pro 2.0 prints a T700 3K raw carbon face with enhanced grit for spin. Knock loose dust off, then rub the CRBN Pickleball Paddle Eraser across the face. The catalog calls it a rubber eraser that lifts ball residue, dirt, and light scuffs off carbon-fiber faces, and lists it for other raw peel-ply surfaces, including kevlar. Printed size is 2 inches by 2 inches by 1 inch. Net weight is 1.5 ounces. Price band is $. The block contains latex. Wipe the crumbs with a dry microfiber. Keep water off the edge and the handle.

Why does spin feel dead on raw carbon before the face wears out?

Outdoor balls shed fine dust that sits in a raw peel-ply texture, so the ball stops grabbing while the carbon is still there. Franklin X-40 is a seamless one-piece outdoor ball with 40 machine-drilled holes, listed for concrete and asphalt. Dura Fast 40 is an outdoor pack of 6 that the listing says flies true, straight, and fast. Clearing that dust often brings the bite back. This catalog does not print an RPM, a grit score, or a wear-hour number.

Can I use a rubber paddle eraser on fiberglass, graphite, or a painted face?

No. CRBN does not recommend the eraser on faces that have an aftermarket coating, spray, or paint. Use a damp water-only microfiber on those faces. HEAD Radical Elite prints a fiberglass hitting surface and a smoother face. Franklin Signature Series Pro 13mm prints a MaxGrit fiberglass surface. Onix Graphite Z5 prints a graphite carbon-fiber face. Selkirk SLK Helix Pro prints a carbon-plus-fiberglass hybrid. Diadem ICON prints a Spin RP polyurethane coating on a carbon face. A rubber block is for raw peel-ply, not for those finishes.

What should I avoid when cleaning a pickleball paddle?

Skip solvents, alcohol, acetone, melamine foam, and dish soap. Soap leaves a film. Melamine foam is an abrasive. A dripping cloth, a hose, or a soak can push water into a honeycomb core and under the handle. Onix Z5 prints a Nomex honeycomb core. HEAD Radical Elite prints an OTC honeycomb polymer core. JOOLA Perseus 16mm prints a 16mm thermoformed edge. Selkirk SLK Helix Pro prints a thermoformed core. Mav Pro 2.0 prints a polypropylene honeycomb core. Wring the cloth until it is barely damp, wipe the face, then dry it.

Should I replace the overgrip and edge guard while I clean the face?

Yes, when the handle is slick or the edge is scuffed. Franklin Pickleball Overgrips are a 3-pack. Each grip is 43.3 inches, wrapped over the grip you already have, in the $ band. Tourna Mega Tac is the tackiest grip the listing says Tourna has created, with 3 grips, finishing tape, and a made-in-the-USA line, also $. Professor Pickleball Edge Guard Tape is wear-resistant vinyl for 12mm–14mm edges or for 16mm+ edges, with an alignment guide, $. Prism Flash, Mav Pro 2.0, and Perseus 16mm print 16mm, so those match the 16mm+ tape. Double Black Diamond Control does not print a millimeter. Confirm the edge width on that paddle before you order tape.

Can I leave a thermoformed or honeycomb paddle in a hot car?

Leave it in the house, not in a closed trunk or on a dashboard. JOOLA Perseus 16mm prints a thermoformed edge. Selkirk SLK Helix Pro prints a thermoformed core. Mav Pro 2.0 prints a polypropylene honeycomb core, and the description positions thermoformed carbon. Onix Z5 prints a Nomex honeycomb core. Heat can soften glue and leave a crushed or delaminated core. The eraser lifts dust. It does not repair a core. Read the thermoformed guide before you treat every carbon face as the same build.

When will cleaning not bring spin or pop back?

If the peel-ply texture is polished smooth, there is no dust left to lift. That is face wear. Shop a paddle whose listing still prints raw carbon or T700. If you hear a dead spot, feel a soft spot, or see the edge separating, that is core crush or delamination. Cleaning will not restore pop. A mid-tier replacement brief is the paddles-under-150 guide. A raw-carbon or T700 face line is the raw-carbon guide. $–$$$$$ badges are relative bands, not a dollar cap. Confirm the live cart on Amazon.com.

Are the dollar-sign badges on this page live prices?

No. $ through $$$$$ are relative catalog bands. The CRBN eraser, Franklin overgrips, Tourna Mega Tac, Professor Pickleball edge tape, the Franklin X-40 12-pack, and the Dura Fast 40 pack sit in the $ band. SLK Helix Pro and Franklin Signature Pro 13mm are $$. The Diadem ICON is $. HEAD Radical Elite is $$$. Prism Flash and Onix Z5 are $$$$. Double Black Diamond Control, Mav Pro 2.0, and Perseus 16mm are $$$$$. Confirm the current price, seller, and exact model on Amazon.com.

Deco

Founder & Editor

Deco (Declan Martin) is the founder and editor of US Pickleball Court. He builds catalog-backed buying guides for paddles, court shoes, balls, bags, apparel, accessories, and portable nets, plus pro tour news and where-to-play coverage written for US players. Focus: verified facts, clear product comparisons, and honest disclosures — not hype.

More from Deco →